| The Electraglide Garage Toolbox Harley specialized tools for rent. | |||
Remember to tell Tom (1-800-210-8675) that you are from the ElectraGlide Garage on Delphi Forums or you will not get these rental prices when you call him. |
| Tool Description | Jims, TR, or Midwest Numbers | Tool Cost (deposit) | Rental Price |
| Camshaft remover/installer (to remove/install cams from the support plate) | JIMS 1277 / TR 49-1840 / MW 97-239 | Deposit $90.00 | Rent $9.00 |
| Inner cam brg puller (removes brgs from case) | JIMS 1279 / TR 49-1842 / MW 97-240 | Deposit $85.00 | Rent $8.50 |
| Outer cam brg puller (removes outer brgs from cams) | JIMS 1280 / TR 49-1845 / MW 97-244 | Deposit $101.00 | Rent $10.00 |
| Inner cam brg installer (installs brgs in cases) | JIMS 1278 / TR 49-1839 / MW 97-241 | Deposit $80.00 | Rent $8.00 |
| Cam/crank sprocket lock (prevents sprockets and chain from moving while bolts are loosed or tightened) | JIMS 1285 / TR 49-1844 / MW 97-245 | Deposit $30.00 | Rent $3.00 |
| Cam chain tensioner tool & pin (tool used to twist tensioner while removing/installing chain; Pin is used to hold tensioner away from chain. Note if tensioner is twisted by hand or pliers and allowed to slip/spring back it will break the foot.) | JIMS 1283 / TR 49-1843 / MW 97-237 | Deposit $30.00 | Rent $3.00 |
| Oil pump/Tappet block alignment tool (these are bolts with tapered shanks used to align the pump while tightening the other pump bolts, then removed and replaced with remaining pump bolts. Requires 2 bolts.) | TR 48-9761 / MW 97-61 | Deposit $15.00 | Rent $1.50 |
| Drive belt pulley (sprocket) lock (prevents front rubber belt drive pulley from turning while tranny's pulley nut is loosened / tightened) | TR 49-6109 / MW 97-88 | Deposit $90.00 | Rent $9.00 |
| Primary chain sprocket lock bar (wedges between the crankshaft's vibration compensating sprocket and the clutch shell's sprocket to prevent either crankshaft or tranny mainshaft from turning.) | TR 49-1829 | Deposit $20.00 | Rent $2.00 |
| Pushrod tube removal/install pliers (used to r&r the pushrod tube, retainer, and cap) | TR 15-8172 / MW 97-256 | Deposit $55.00 | Rent $5.50 |
Home Page |